Use "10base-t" in a sentence

1. The IEEE approves the 10BASE-T Ethernet specification.

2. Such a cable will work for 10BASE-T or 100BASE-TX.

3. 10BASE2 systems do have a number of advantages over 10BASE-T.

4. 10BASE-T used the basic signalling of StarLAN 10 and added link beat.

5. Method, transceiver, and system for providing wireless communication compatible with 10base-t ethernet

6. These also masquerade under the techie names of 10Base- 10Base-2 and 10Base-T respectively.

7. 10BASE-T and 100BASE-TX only require two pairs (pins 1–2, 3–6) to operate.

8. 100BASE-T4 -- 100 Mbit/s ethernet over cat-3 cabling (as used for 10BASE-T installations).

9. Many different modes of operations exist for Ethernet over twisted pair cable using RJ-45 connectors (10BASE-T half duplex, 10BASE-T full duplex, 100BASE-TX half duplex, ...), and most devices are capable of different modes of operations.

10. The 10BASE-T and 100BASE-TX Ethernet standards use one wire pair for transmission in each direction.

11. This single port Fast Ethernet Adapter is capable of handling both 100BASE-TX and 10BASE-T network data.

12. StarLAN 10 and SynOptics LattisNet provided the basis for the later 10 megabit per second standard 10BASE-T.

13. What is the maximum distance that 10BASE-T will transmit data before signal attenuation affects the data delivery?

14. The present invention provides a method (200), transceiver (100), and system (900) for providing wireless communication compatible with 10BASE-T Ethernet.

15. Link segments can be 10BASE-T, 10BASE-FL or 10BASE-FB – for prompt collision detection, a full-duplex medium (not transmission) is required.

16. This led to the development of 10BASE-T (and its successors) and structured cabling which is still the basis of most commercial LANs today.

17. Early models of Power Macintosh and the Macintosh Quadra supported 10BASE-T via the Apple Attachment Unit Interface while still supporting LocalTalk-based networking.

18. The cable standard provides performance of up to 100 MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet).

19. Auto-negotiation (formerly "NWay") is based on pulses similar to those used by 10BASE-T devices to detect the presence of a connection to another device.

20. Some network interface cards such as the 3Com 3C-523 could be used with either StarLAN 10 or 10BASE-T, by switching link beat on or off.

21. These pulses are called link integrity test (LIT) pulses in the 10BASE-T terminology, and are referred to as normal link pulses (NLP) in the auto-negotiation specification.

22. Currently Ethernet has many varieties that vary both in speed and physical medium used. Perhaps the most common forms used are 10BASE-T, 100BASE-TX , and 1000BASE-T .

23. In addition it contained a mechanism for detecting the type but not the duplex setting of 10BASE-T, 100BASE-TX and 100BASE-T4 peers that did not use autonegotiation.

24. Ethernet on unshielded twisted-pair cables (UTP), beginning with StarLAN and continuing with 10BASE-T was designed for point-point links only and all termination was built into the device.

25. 10BASE-T -- runs over 4 wires (two twisted pairs) on a cat-3 or cat-5 cable. A hub or switch sits in the middle and has a port for each node.

26. In addition, the E models had Wide SCSI and Fast Ethernet interfaces, in place of the narrow SCSI and 10Base-T Ethernet of the standard Ultra 1 (service code A11, codename Neutron).

27. AUI connectors became rare beginning in the early 1990s when computers and hubs began to incorporate the MAU, particularly as the 10BASE-T standard became more common and use of 10BASE5 (thicknet) and 10BASE2 (thinnet) declined.

28. In the early days of Fast Ethernet , fast ethernet switches were relatively expensive devices. However, hubs suffered from the problem that if there were any 10BASE-T devices connected then the whole system would have to run at 10 Mbit.

29. Besides audio and video transmission, ISDB also defines data connections (Data broadcasting) with the internet as a return channel over several media (10Base-T/100Base-T, Telephone line modem, Mobile phone, Wireless LAN (IEEE 802.11) etc.) and with different protocols.

30. The priority among modes specified in the 2018 edition of 802.3 is as follows: 40GBASE-T full duplex 25GBASE-T full duplex 10GBASE-T full duplex 5GBASE-T full duplex 2.5GBASE-T full duplex 1000BASE-T full duplex 1000BASE-T half duplex 100BASE-T2 full duplex 100BASE-TX full duplex 100BASE-T2 half duplex 100BASE-T4 half duplex 100BASE-TX half duplex 10BASE-T full duplex 10BASE-T half duplex In other words, among the modes that are supported by both devices, each device chooses the one that is the topmost in this list.

31. Despite Token Ring's modest popularity in the 80's and 90's, with the advent of the twenty-first century, the majority of local area networks have now settled on Ethernet . At the physical layer most Ethernet implementations use copper twisted-pair cables (including the common 10BASE-T networks).

32. Initially very successful, it went into steep decline after the introduction of 10BASE-T for Ethernet and the EIA/TIA 568 cabling standard in the early 1990s . A fierce marketing effort led by IBM sought to claim better performance and reliability over Ethernet for critical applications due to its deterministic access method , but was no more successful than similar battles in the same era over their Micro Channel architecture .